gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Panel Replacement|Page 8363 > < Panel Replacement|Page 8361
Page 4
background image

Tighten
Tighten the armrest cover screws to 5 N.m (44 lb in).

Door Trim Panel Replacement

Trim Panel Replacement - Door

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure

1. Remove the screws and the armrest cover (YC5).

2. Remove the window regulator handle, if equipped.

3. Pull out on the lock lever escutcheon, starting with the front edge, in order to remove the lock lever escutcheon.

4. Pull out on the top edge of the escutcheon and pivot down in order to clear the tab at the trim panel and remove the upper corner trim if equipped.
5. Remove the caps that cover the screws retaining the assist handle.
6. Remove the screws that retain the handle to the door.
7. Remove the one screw at the front edge of the accessory switch mount plate.

Panel Replacement|Page 8363 > < Panel Replacement|Page 8361