Safari Van 2WD V6-4.3L VIN X (2003)
3. Pull out on the lock lever escutcheon, starting with the front edge, in order to remove the lock lever escutcheon.
4. Pull out on the top edge of the escutcheon and pivot down in order to clear the tab at the trim panel and remove the upper corner trim if equipped.
5. Remove the caps that cover the screws retaining the assist handle.
6. Remove the screws that retain the handle to the door.
7. Remove the one screw at the front edge of the accessory switch mount plate.
8. Remove the plate from the trim panel.
9. Disconnect the electrical connectors from the switches on the plate, as needed.
10. Remove the door courtesy lamp from the door panel, if equipped.
11. Use J 38778 to release the door trim panel retainers.
12. Remove the trim panel from the door.
INSTALLATION PROCEDURE
IMPORTANT: Replace any trim panel retainers that were damaged during removal.
