Safari Van 2WD V6-4.3L VIN X (2003)
Upper Sliding Door Roller: Service and Repair
Roller Bracket Replacement - Upper
Removal Procedure
1. Remove the upper roller bracket garnish molding.
2. Remove the rubber stopper from the upper roller track.
3. Remove the front cap.
4. Remove the bracket (1) to door bolts (4).
5. Remove the upper roller bracket from the track.
Installation Procedure
1. Install the upper roller bracket (1) to the track.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bracket to door and bolts (4).
Tighten the bracket bolts to the door to 25 N.m (18 lb ft).
3. Install the front cap.
4. Install the rubber stopper to the upper roller track.
5. Install the upper roller bracket garnish molding.