gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Hood Insulator / Pad > < Hood Hinge|Service and Repair

Safari Van 2WD V6-4.3L VIN X (2003)

Page 2
background image

Tighten the bolts to 25 N.m (18 lb ft).

4. Install the hinge to fender nut.
5. Install the hinge to fender bolt.

Tighten the bolt to 25 N.m (18 lb ft).

6. Lower the hood.
7. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement  (See: Cowl/Cowl Moulding / Trim/Service and Repair) .

Hood Insulator / Pad > < Hood Hinge|Service and Repair