Safari Van 2WD V6-4.3L VIN X (2003)
Trunk / Liftgate Latch: Service and Repair
Latch Replacement - Lift Gate
Latch Replacement - Lift Gate
Removal Procedure
1. Remove the liftgate garnish molding (1). Refer to Garnish Molding Replacement - Lift Gate (See: Interior Moulding / Trim/Trim Panel/Service
and Repair) .
2. Remove the control rods from the actuator lever (2).
3. Remove the liftgate latch screws (6).
4. Remove the slide latch (4) from the liftgate.
5. Remove the control rod from the liftgate.
6. Remove the control rod from the liftgate latch.
Installation Procedure