gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Latch Replacement - Lift Gate|Page 8513 > < Latch Replacement - Lift Gate|Page 8511
Page 1
background image

Trunk / Liftgate Latch: Service and Repair
Latch Replacement - Upper and Lower

Latch Replacement - Upper and Lower

Removal Procedure

1. Remove the trim panel. Refer to Trim Panel Replacement - Rear Door (Cargo Doors)  (See: Interior Moulding / Trim/Console/Service and

Repair/Trim Panel Replacement - Rear Door (Cargo Doors))Trim Panel Replacement - Rear Door (E54)  (See: Interior Moulding /
Trim/Console/Service and Repair/Trim Panel Replacement - Rear Door (E54)) .

2. Peel the water deflector away from the door. Use a soft-surfaced scraper if needed. Refer to Water Deflector Replacement  See: Doors/Rear

Door/Rear Door Panel/Service and Repair

3. Remove the control rods from the remote lock.

1. Pry the anchor out of the hole.
2. Push the clip away from the lever.
3. Pull the rod and the clip away from the lever.

4. Remove the upper latch screws.

5. Remove the upper latch, if equipped.

6. Remove the upper latch and the rod from the door.

Latch Replacement - Lift Gate|Page 8513 > < Latch Replacement - Lift Gate|Page 8511