Safari Van 2WD V6-4.3L VIN X (2003)
5. Remove the retaining rail screws.
6. Remove the retaining rail from the body.
Installation Procedure
1. Install the retaining rail to the body.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the retaining rail screws.
Tighten the retaining rail screws to 2 N.m (18 lb in).
3. Install the cladding to the vehicle.
4. Install the nut on the back of the cladding to the stud.
Tighten the nut to 7 N.m (62 lb in).
5. Install the screws into the cladding.
Tighten the screws to 2 N.m (18 lb in).
6. Install the retainers into the wheelhouse extension flange.
Cladding Replacement - Right Rocker Panel
Cladding Replacement - Right Rocker Panel
