Safari Van 2WD V6-4.3L VIN X (2003)
Body / Frame Mount Bushing: Service and Repair
Frame Cushion or Insulator Replacement
Tools Required
J 41602 Body Protection Hoist Adapter Set
Removal Procedure
1. Raise the vehicle at the frame. Refer to Lifting and Jacking the Vehicle in General Information.
Important: Properly support the frame and the body while changing the mount. If you are changing only one mount, the entire side on
which the mount is placed must be lowered enough to provide clearance for the mount.
2. Use the J 41602 in order to support the body at the pinchweld flange.
3. Remove the bolts that retain the front bumper fascia at the brace.
4. Remove the bolts that retain the front bumper fascia at the fender.
