Safari Van 2WD V6-4.3L VIN X (2003)
Sun Visor: Procedures
SUNSHADE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the sunshade retaining screws, unplug the wiring harness (if equipped).
2. Remove the sunshade from the vehicle.
INSTALLATION PROCEDURE
1. Install the sunshade to the vehicle.
2. Install the sunshade retaining screws, connect the sunshade wiring harness (if equipped).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the sunshade retaining screws to 2 N.m (18 lb in).