Safari Van 2WD V6-4.3L VIN X (2003)
2. Install the molding to the pillar:
2.1.
Align the fasteners with the slots in the pillar.
2.2.
Press firmly until the fasteners are fully seated.
3. Install the bolts that retain the assist handle to the pillar.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts that retain the assist handle to the pillar to 8 N.m (71 lb in).
4. Install the front passenger's seat belt upper retainer.
5. Install the retaining screws.
Tighten
Tighten the retaining screws to 2 N.m (18 lb in).
Garnish Molding Replacement - Side Door Opening Frame
GARNISH MOLDING REPLACEMENT - SIDE DOOR OPENING FRAME
TOOLS REQUIRED
J 38778 Door Trim Pad and Garnish Clip Remover
REMOVAL PROCEDURE
1. Remove the garnish molding screw.
