Safari Van 2WD V6-4.3L VIN X (2003)
Repair/Removal and Replacement/Window Replacement - Swing Out) in Stationary Windows.
2. Remove the screws that retain the right molding on the sides and the bottom.
3. Remove the screws that retain the left molding on the sides and the bottom.
4. Remove the molding from the door in the area of the retainers.
There are 2 retainers on top, one in the center of the panel, and 6 around the outside edge.
Installation Procedure
1. Install the left molding to the door:
1. Place the retainers into the holes.
2. Press on the panel at the retainer locations until the retainers are fully seated.