gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Power Locks > < Keyless Entry Transmitter Battery|Service and Repair
Page 2
background image

Use one 3 V CR2032 battery (or the equivalent).

2. Close the transmitter case (6, 4).

3. Ensure the seal is in position. Align the 2 halves of the case and snap the two halves together.
4. Synchronize the transmitter.
5. Replace the batteries when the range of the transmitter decreases to less than 7 m (23 ft).

Power Locks > < Keyless Entry Transmitter Battery|Service and Repair