Safari Van 2WD V6-4.3L VIN X (2003)
Head Rest: Procedures
Bucket Seat Head Restraint Bushing Replacement
BUCKET SEAT HEAD RESTRAINT BUSHING REPLACEMENT
REMOVAL PROCEDURE
1. Remove the seat back cover and pad.
2. Remove the headrest bushings from the seat back frame as follows:
2.1.
Squeeze together the retaining tabs at the base of the bushing.
2.2.
Remove the bushing by lifting the bushing up.
INSTALLATION PROCEDURE
1. Install the headrest bushings by pressing the bushings into the seat back frame until the retaining tabs snap into place.
2. Install the seat back trim cover and pad assembly.
Head Restraint Replacement With RPO Code YC6
HEAD RESTRAINT REPLACEMENT WITH RPO CODE YC6
REMOVAL PROCEDURE
