gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Handle and Lock Cylinder - Rear Door Outside|Page 9013 > < Handle and Lock Cylinder - Rear Door Outside|Page 9011
Page 3
background image

9. Install the clip to the outside handle.

10. Install the outside handle to the door.
11. Install the outside handle nuts.

Tighten the nuts to 7 N.m (62 lb in).

12. Install the control rod (1) to the outside handle through the clip.
13. Install the water deflector. Refer to Water Deflector Replacement  See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and

Repair

14. Install the trim panel. Refer to Trim Panel Replacement - Rear Door (Cargo Doors)  (See: Interior Moulding / Trim/Console/Service and

Repair/Trim Panel Replacement - Rear Door (Cargo Doors))Trim Panel Replacement - Rear Door (E54)  (See: Interior Moulding /
Trim/Console/Service and Repair/Trim Panel Replacement - Rear Door (E54)) .

Handle and Lock Cylinder - Rear Door Outside|Page 9013 > < Handle and Lock Cylinder - Rear Door Outside|Page 9011