Safari Van 2WD V6-4.3L VIN X (2003)
11. Remove the 2 brake caliper mounting bolts.
Caution:
Do not depress the brake pedal with the brake rotors/calipers and/or the brake drums removed. Damage to the brake system may
result If brake system damage occurs and is not repaired, vehicle damage and/or personal injury or death may result.
12. Remove the brake caliper from the brake caliper mounting bracket.
Installation Procedure
1. Install the brake caliper to the brake caliper mounting bracket.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the 2 brake caliper mounting bolts.
Tighten the 2 brake caliper mounting bolts to 108 Nm (80 ft. lbs.).
3. Remove the rubber cap or plug from the exposed brake hose fitting end.
