Safari Van 2WD V6-4.3L VIN X (2003)
Parking Brake Cable: Service and Repair
Park Brake Cable Equalizer - Replacement
Park Brake Cable Equalizer Replacement
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle.
3. Remove the threaded end of the right rear park brake cable from the adjuster.
4. Disconnect the cables from the equalizer.
Installation Procedure
1. Connect the rear park brake cables to the equalizer.
2. Install the threaded end of the right rear cable to the adjuster.
3. Remove the safety stands and lower the vehicle.
4. Adjust the park brake system.
