Safari Van 2WD V6-4.3L VIN X (2003)
1. Install the cable.
2. Route the cable through the floor pan and engage the grommet.
3. Install the front cable to the pedal assembly.
4. Install the pedal assembly.
5. Roll the carpet into place.
6. Install the step trim plate.
7. Install the cowl side panel trim.
8. Raise the vehicle.
9. Connect the front cable to the park brake cable adjuster.
10. Adjust the park brake system.
11. Remove the safety stands and lower the vehicle.
Rear - Left
Park Brake Cable Replacement - Left Rear
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle
3. Relieve the tension on the park brake cables by loosening the nut at the adjuster.
