Safari Van 2WD V6-4.3L VIN X (2003)
Tighten the bolt to 22 Nm (16 ft. lbs.).
5. Install the cable to the mounting bracket until the locking tabs snap into place.
6. Connect cable end to the equalizer.
7. Remove the safety stands and lower the vehicle.
8. Adjust the park brake cable.
Rear - Right
Park Brake Cable Replacement -Right Rear
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle.
3. Remove the threaded end of the cable from the adjuster.
4. Remove the cable from the differential clip.
5. Remove the cable from the backing plate by depressing the locking tabs.