Safari Van 2WD V6-4.3L VIN X (2003)
Parking Brake Shoe: Adjustments
Park Brake Shoe Adjustment
Tools Required
-
J 21177-A Drum-to-Brake Shoe Clearance Gage
Caution:
Refer to Brake Dust Caution, refer to Service Precautions.
See: Service Precautions/Technician Safety Information/Brake Dust Caution
Important: The park brake shoes must be adjusted before the park brake cable is adjusted.
1. Raise and support the vehicle.
2. Remove the rotors.
3. Set the J21177-A so that it contacts the inside diameter of the rotor.
4. Position the J21 177-A over the shoe and the lining at the widest point.
5. Turn the adjuster nut until the lining just contacts the J21177-A.
6. Repeat steps 1-3 for the opposite side.
7. The clearance between the park brake shoe and the rotor is 0.6604 mm (0.026 inch).
