Safari Van 2WD V6-4.3L VIN X (2003)
8. Remove the hydraulic booster mounting nuts from the inside of the vehicle.
9. Remove the booster assembly.
10. Remove the gasket.
Installation Procedure
1. Install the gasket.
2. Install the booster assembly.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
3. Install the booster mounting nuts.
Tighten the nuts to 36 Nm (27 ft. lbs.).
4. Connect the pushrod to the brake pedal.
5. Install the master cylinder.
6. Install the master cylinder nuts.
