Safari Van 2WD V6-4.3L VIN X (2003)
6. Install the accumulator retainer ring (2).
7. Release the C-clamp.
8. Remove the nut from the stud.
9. Remove the J 26889.
10. Install the hydraulic booster.
11. Install the master cylinder to the hydraulic brake booster.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
12. Install the master cylinder nuts.
Tighten the master cylinder nuts to 36 Nm (27 ft. lbs.).
