Safari Van 2WD V6-4.3L VIN X (2003)
8. From inside the vehicle, snap the cable fitting onto the stud on the throttle body linkage.
9. Reroute and insert the cruise control cable fitting into the round hole in the accelerator bracket.
IMPORTANT: Verify that the cable fitting locking tabs are expanded, and that the tabs are locked in the accelerator bracket hole.
10. When installing a new cruise control cable or adjusting an old cruise control cable (3), engage the lock (1) on the cruise control adjuster (2).
The white paint mark will disappear when the adjuster is locked.
IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts
the cable.
11. Install the cruise control cable to the HVAC module by placing the cable inside the module clip and snapping the clip closed.
12. Perform the Cruise Control System Functional Test. Refer to Cruise Control Inoperative/Malfunctioning.
13. If the cruise control cable (3) requires adjustment, release the lock on the cable adjuster (2) using the following steps:
13.1. Gently squeeze the tabs on the adjuster plunger (1).
