Safari Van 2WD V6-4.3L VIN X (2003)
Drive Belt: Service and Repair
Drive Belt Replacement
Removal Procedure
1. Remove the air cleaner assembly.
2. Remove the air cleaner outlet duct from the throttle body.
3. Install a 3/8 inch drive wrench on the drive belt tensioner arm and rotate the arm counterclockwise.
4. Remove the drive belt.
5. Slowly release the tension on the drive belt tensioner arm.
Installation Procedure
1. Route the belt over all the pulleys except the tensioner arm.
2. Observe drive belt routing for vehicles without air conditioning.
