Safari Van 2WD V6-4.3L VIN X (2003)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley - Right
Drive Belt Idler Pulley Replacement - Right
Removal Procedure
1. Remove the drive belt.
2. Remove the drive belt idler pulley bolt.
3. Remove the drive belt idler pulley from the generator mounting bracket.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the drive belt idler pulley and bolt to the generator mounting bracket.
^
Tighten the bolt to 50 Nm (37 ft. lbs.).
2. Install the drive belt.
