Safari Van 2WD V6-4.3L VIN X (2003)
4. Install the 6 injectors into the proper lower intake manifold bores in proper sequence (3, 5, 1, 2, 4, 6).
5. Inspect the injectors in order to ensure that they are firmly seated and locked in the lower intake manifold bores.
6. Ensure that the electrical connections of the injectors are positioned so that they do not interfere with each other, and are pointing towards the
center of the intake manifold. Rotate the electrical connector inboard if necessary. Also, ensure there is no tension on the injector wires.
7. Install a NEW upper intake manifold to lower intake manifold gasket into the groove of the upper intake manifold.
8. Install the upper intake manifold onto the lower intake manifold.
9. If reusing the fasteners, apply threadlock GM P/N 1234582 (Canadian P/N 10953489) or equivalent, to the threads of the upper intake manifold
attaching studs.
10. Install the upper intake manifold attaching studs.
11. Tighten the upper intake manifold attaching studs on the first pass to 5 Nm (44 lb.in.)
12. Tighten the upper intake manifold attaching studs on the final pass to 9 Nm (80 lb.in.)
