Safari Van 2WD V6-4.3L VIN X (2003)
2. Install the evaporator core.
3. Install the inner case to the evaporator module.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the evaporator case screws.
Tighten
Tighten the screws to 6 N.m (53 lb in).
5. Install the outer case to the evaporator module.
6. Install the screws to the evaporator case.
Tighten
Tighten the screws to 6 N.m (53 lb in).
7. Install a new O-ring.
8. Install the evaporator tube to the evaporator.
9. Tighten the evaporator tube nut to the evaporator.
Tighten
Tighten the nut to 28 N.m (20 lb ft).
10. Install the bypass valve bracket to the outer case.
11. Install the relay bracket.
12. Connect the electrical connectors.
13. Install the accumulator.
14. Install the coolant recovery reservoir.
15. Install the air cleaner assembly.
