Safari Van 2WD V6-4.3L VIN X (2003)
Air Bag(s) Arming and Disarming: Service and Repair
Enabling
Zone 1
1. Connect the inflatable restraint front end discriminating sensor connector to the inflatable restraint front end discriminating sensor (1) located on
the frame crossmember.
2. Install the CPA to the inflatable restraint front end discriminating sensor connector.
3. Install the AIR BAG fuse into the I/P fuse block (1) located in the I/P fuse block.
4. Staying well away from all air bags, turn ON the ignition, with the engine OFF.
4.1.
The AIR BAG indicator will flash 7 times.
4.2.
The AIR BAG indicator will then turn OFF.
5. Perform the Diagnostic System Check - Restraint Systems if the AIR BAG indicator does not operate as described.
Zone 3
1. Remove the key from the ignition.
