Safari Van 2WD V6-4.3L VIN X (2003)
4. Connect the steering wheel module yellow 2-way connector (1) located left of the steering column near the knee bolster.
5. Install the CPA to the steering wheel module yellow 2-way connector (1) located near the knee bolster.
6. Install the AIR BAG fuse to the I/P fuse block (1) located in the I/P fuse block.
7. Install the passenger knee bolster.
8. Staying well away from all air bags, turn ON the ignition, with the engine OFF.
8.1.
The AIR BAG indicator will flash 7 times.
8.2.
The AIR BAG indicator will then turn OFF.
9. Perform the Diagnostic System Check - Restraint Systems if the AIR BAG indicator does not operate as described.
