Safari Van 2WD V6-4.3L VIN X (2003)
Glove Box Lamp: Service and Repair
Instrument Panel (I/P) Storage Compartment Lamp Replacement
INSTRUMENT PANEL (I/P) STORAGE COMPARTMENT LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Open the instrument panel storage compartment.
2. Gently depress the tabs at the top and the bottom of the compartment lamp switch by using a small flat-bladed tool.
3. Remove the compartment lamp switch.
4. Disconnect the electrical connector from the switch.
5. Pull the bulb from the compartment lamp switch.
INSTALLATION PROCEDURE
1. Install the bulb to the compartment lamp switch.
2. Connect the electrical connector to the switch.
3. Install the compartment lamp switch and press in order to engage the tabs.
4. Close the instrument panel storage compartment.