Safari Van 2WD V6-4.3L VIN X (2003)
Parking Lamp: Service and Repair
PARK/TURN SIGNAL LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Turn OFF the headlamp switch.
2. Remove the mounting screws.
3. Remove the park/turn signal lamp from the vehicle.
4. Remove the lamp sockets from the park/turn signal lamp housing.
5. Remove the bulbs from the lamp sockets.
INSTALLATION PROCEDURE
1. Install the bulbs into the lamp sockets.
2. Install the lamp socket to the park/turn signal lamp housing.
3. Install the park/turn signal lamp to the vehicle.
4. Install the mounting screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the mounting screws to 1.4 N.m (12 lb in).
