Safari Van 2WD V6-4.3L VIN X (2003)
6. Remove the oil cooler lines from the radiator.
7. Remove the engine oil cooler lines.
8. Clean all of the components with a suitable solvent. Dry the components with compressed air.
9. Inspect the following for damage or distortion:
^
The connector fittings
^
The connectors
^
The engine oil cooler lines
Installation Procedure
Important: Inspect the cooler line for a damaged or missing plastic cap. If the plastic cap is damaged or missing, replace it with a new plastic cap.
1. Install the engine oil cooler lines.
2. Install the engine oil cooler lines.
3. Install the engine oil cooler lines to the engine bracket.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the engine oil cooler line bracket bolt.
^
Tighten the bolt to 10 Nm (89 inch lbs.).
