Safari Van 2WD V6-4.3L VIN X (2003)
7. Remove the bolts securing the park/neutral position switch to the transmission.
8. Remove the park/neutral position switch from the manual shaft. If the park/neutral position switch did not slide off the manual shaft, file the outer
edge of the manual shaft in order to remove any burrs.
Installation Procedure
1. Install the switch to the transmission manual shaft by aligning the switch hub flats with the manual shaft flats.
2. Slide the switch onto the transmission manual shaft until the switch mounting bracket contacts the mounting bosses on the transmission.
Important: If a new switch is being installed, the switch will come with a positive assurance bracket. The positive assurance bracket aligns the new
switch in it proper position for installation and the use of neutral position adjustment tool will not be necessary.
3. Install the switch to the transmission with two bolts finger tight.
