Safari Van 2WD V6-4.3L VIN X (2003)
5. Install the fuel pipes into the cylinder head retainer.
6. Install the mounting stud (7).
Tighten
Tighten the mounting stud to 33 N.m (24 lb ft).
7. Install the fuel pipes into the crossrail retainer.
8. Install the mounting bolt (5) to the crossrail.
Tighten
Tighten the mounting bolt to 11 N.m (97 lb in).
9. Lower the vehicle.
10. Remove the caps from the engine compartment fuel pipes.
11. Connect the fuel feed and return pipes (8) to the engine compartment fuel pipes.
Ensure the O-rings are in place.
Tighten
Tighten the fuel feed and return pipe fittings to 30 N.m (22 lb ft).
12. Connect the negative battery cable.
13. Inspect for leaks.
13.1. Turn ON the ignition, with the engine OFF, for 2 seconds.
13.2. Turn OFF the ignition for 10 seconds.
13.3. Turn ON the ignition, with the engine OFF.
13.4. Inspect for fuel leaks.
14. Install the engine cover.
