Safari Van 2WD V6-4.3L VIN X (2003)
Fuel Gauge Sender: Service and Repair
REMOVAL PROCEDURE
1. Remove the fuel sender assembly.
2. Disconnect the fuel pump electrical connector (5).
3. Remove the fuel level sensor electrical connector retaining clip (6).
4. Disconnect the fuel level sensor electrical connector (7) from under the fuel sender cover.
5. Remove the fuel level sensor retaining clip (4).
6. Squeeze the locking tangs and remove the fuel level sensor (3).
INSTALLATION PROCEDURE
1. Install the fuel level sensor (3).
2. Install the fuel level sensor retaining clip (4).
3. Connect the fuel level sensor electrical connector (7).
4. Connect the fuel level sensor electrical connector retaining clip (6).
5. Connect the fuel pump electrical connector (5).
6. Install the fuel sender assembly.
