Safari Van 2WD V6-4.3L VIN X (2003)
3. Install two new screws for the camshaft position (CMP) sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 2.2 N.m (19 lb in).
4. Identify the correct rotor mounting position:
-
At the rotor screw holes (1)
-
At the rotor locator pin holes (2)
5. Install the distributor rotor according to the index marks.
6. Install two rotor hold down screws.
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
