Safari Van 2WD V6-4.3L VIN X (2003)
4. Disconnect the electrical connectors (2) from the body control module (1).
5. Remove the body control module from the vehicle.
INSTALLATION PROCEDURE
1. Install the body control module (2) to the vehicle.
2. Install the body control module to the bracket (1) at an angle under the wide hook retainer, with the label facing away from the bracket.
3. Apply pressure on the center of the body control module in order to move the module toward the mounting bracket base. Snap the module into
place.
4. Ensure that the module is fully seated. Ensure that both snap retainers are holding the module.
