Safari Van 2WD V6-4.3L VIN X (2003)
3. Remove the J 34730-1A from the fuel pressure connection.
4. Drain any fuel remaining in the fuel pressure gage into an approved container.
5. Inspect for leaks using the following procedure:
5.1.
Turn ON the ignition, with the engine OFF for 2 seconds.
5.2.
Turn OFF the ignition for 10 seconds.
5.3.
Turn ON the ignition, with the engine OFF.
5.4.
Inspect for fuel leaks.
6. Install the cap on the fuel pressure connection.
7. Install the engine cover.
