gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 98 > < Initial Inspection and Diagnostic Overview
Page 2
background image

Steps 3 - 5

The numbers below refer to the step numbers on the diagnostic table.
2. Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data

circuit.The specified procedure will determine the particular condition.

4. This step is checking for DTCs in the BCM.
5. This step is checking for RAP specific DTCs.

Initial Inspection and Diagnostic Overview|Page 98 > < Initial Inspection and Diagnostic Overview