Safari Van 2WD V6-4.3L VIN X (2003)
1. To install the SIR coil, perform the following procedure:
1.1.
Aim the wheels straight ahead.
1.2.
Align the block tooth and the centering mark on the race and upper shaft assembly at the 12 o'clock position.
2. If centering is required, follow the instructions on the notice (1) of the coil assembly. Refer to Inflatable Restraint Steering Wheel Module Coil
Centering in Steering Wheel and Column.
IMPORTANT: The new SIR coil will be pre-centered. Do not remove the centering tab from the new SIR coil until the installation is complete. If
the SIR coil does not come with a centering tab, you must center the SIR coil.
3. Align the SIR coil assembly (1) with the horn tower on the turn signal cancel cam assembly (2).
