Safari Van 2WD V6-4.3L VIN X (2003)
Seat Belt Buckle: Service and Repair
Seat Belt Buckle and Latch Replacement - Rear (RPO ZP7)
REMOVAL PROCEDURE
1. Remove the seat belt buckle latch bolt from the side of the riser.
2. Remove the seat belt buckle latch. The seat does not have to be removed from the vehicle.
INSTALLATION PROCEDURE
1. Install the seat belt buckle latch to the side of the riser.
2. Install the seat belt buckle latch bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the seat belt buckle latch bolt to the riser to 35 N.m (26 lb ft).
Seat Belt Buckle and Latch Replacement - Rear (RPO ZP5)
REMOVAL PROCEDURE
1. Remove the rear bench seat from the vehicle.
2. Remove the seat belt latch by removing the hog rings and lifting up on the cover to expose the nut. The complete seat cover does not have to be
removed.
3. Remove the seat belt latch nut.
