Safari Van 2WD V6-4.3L VIN X (2003)
Seat Belt Retractor: Service and Repair
Seat Belt Retractor Replacement - Right Front
REMOVAL PROCEDURE
1. Slide the front seat all the way forward.
2. Remove the seat belt from the seat belt guide located on the side of the bucket seat.
3. Remove the cover from the shoulder belt guide to expose the bolt.
4. Remove the retaining bolt from the shoulder belt guide adjuster bracket.
5. Remove the right front lock pillar inside garnish molding.
6. Remove the cover on the base of the retractor to expose the bolt.
7. Remove the bolt from the retractor to the pillar.
8. Remove the electrical connectors.
9. Remove the retractor from the vehicle.
INSTALLATION PROCEDURE
1. Install the retractor to the vehicle.
2. Install the electrical connectors.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the retractor bolt to the pillar.
Tighten
Tighten the retractor bolt to the pillar to 53 N.m (39 lb ft).
4. Install the cover to the base of the retractor.
