Safari Van 2WD V6-4.3L VIN X (2003)
5. Install the bolt retaining the shoulder belt to the guide adjuster bracket.
Tighten
Tighten the shoulder belt retaining bolt to 30 N.m (22 lb ft).
6. Install the right front lock pillar inside garnish molding.
7. Install the cover to the shoulder belt guide.
8. Install the seat belt to the seat belt guide located on the side of the bucket seat.
9. Slide the front seat back in position.
Seat Belt Retractor Replacement - Left Rear
REMOVAL PROCEDURE
1. Remove the left rear bucket seat.
2. Remove the seat belt bolt from the rear floor.
3. Remove the body side trim panel.