Safari Van 2WD V6-4.3L VIN X (2003)
4. Remove the retractor retaining bolt.
5. Remove the retractor from the vehicle.
INSTALLATION PROCEDURE
1. Install the retractor to the vehicle.
2. Install the retractor retaining bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the retractor retaining bolt to 53 N.m (39 lb ft).
3. Install the shoulder belt retaining bolt to the bracket.
Tighten
Tighten the shoulder belt retaining bolt to the bracket to 35 N.m (26 lb ft).
