Safari Van 2WD V6-4.3L VIN X (2003)
1. Install the retractor to the vehicle.
2. Install the bolt retaining the shoulder belt to the bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt retaining the shoulder belt to the bracket to 30 N.m (22 lb ft).
3. Install the shoulder belt cover.
4. Install the retractor retaining bolt.
Tighten
Tighten the retractor retaining bolt to 53 N.m (39 lb ft).
5. Install the storage tray. Squeeze the storage tray together. Press the storage tray into place.
6. Install the jack storage access door.