Safari Van 2WD V6-4.3L VIN X (2003)
2. Install the new prevailing torque nut (2) to the pitman arm (3) ball stud.
-
Tighten the nut to 62 Nm (48 ft. lbs.).
3. Use the J 29193 in order to install the connecting rod (1) ball stud to the relay rod (4).
Ensure that the seal is on the stud.
-
Tighten the J 29193 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
4. Remove the J 29193.
5. Install the new prevailing torque nut (5) to the ball stud.
-
Tighten the nut to 47 Nm (35 ft. lbs.).
6. Lower the vehicle.
7. Adjust the toe-in.
