Safari Van 2WD V6-4.3L VIN X (2003)
5. Raise the vehicle. Refer to Vehicle Lifting.
6. Install the power steering pump rear mounting bracket nut.
-
Tighten the power steering pump rear mounting bracket nut to 41 Nm (30 ft. lbs.).
7. Lower the vehicle.
8. Uncap the ends of the power steering hoses.
9. Connect the power steering pump remote reservoir hose to the power steering pump.
10. Connect the power steering cooler hose to the power steering pump.
11. Connect the power brake booster inlet hose to the power brake booster.
-
Tighten the power brake booster inlet hose to the power brake booster to 27 Nm (20 ft. lbs.).
12. Remove the drain pan from under the vehicle.
13. Install the power steering pump pulley.
14. Bleed the power steering system.
15. Inspect the power steering pump for leaks and the hoses for proper clearance from the frame and from other components.
