Safari Van 2WD V6-4.3L VIN X (2003)
Control Arm Bushing: Service and Repair
Upper
Upper Control Arm Bushings Replacement
-
Tools Required
-
J 22269-01 Accumulator and Servo Piston Remover
Removal Procedure
1. Remove the upper control arm.
2. Mount the upper control arm in a vise.
3. Remove the upper control arm shaft nuts and the retainers.
4. Remove the upper control arm bushings. Use the J22269-01, a slotted washer, and a short piece of pipe slightly larger than the bushing.
5. Remove the upper control arm shaft from the upper control arm.
Installation Procedure