Safari Van 2WD V6-4.3L VIN X (2003)
Control Arm Bushing: Service and Repair
Lower
Lower Control Arm Bushings Replacement
-
Tools Required
-
J 9519-E Lower Ball Joint Remover and Installer
-
J 36618 Lower Control Arm Bushing Service Set
Removal Procedure
1. Remove the lower control arm.
2. Remove the front bushing.
2.1.
Unbend the crimps using a punch.
2.2.
Remove the bushing using the J 36618-2, the J 9519-23, the J 36618-4, and the J 36618-1.
3. Remove the rear bushing (no crimp). Remove the bushing using the J 36618-5, the J 36618-3, the J 36618-2, and the J 9519-23.
Installation Procedure
1. Install the front bushing using the J 36618 and the J 9519-23. After installing the bushing, crimp the bushing into place.
2. Install the rear bushing using the J 36618 and the J 9519-23.
3. Install the lower control arm.
