Safari Van 2WD V6-4.3L VIN X (2003)
Cross-Member: Service and Repair
Transmission Support Replacement
Transmission Support Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Support the transmission with a transmission jack.
3. Remove the two nuts securing the transmission mount to the transmission support.
4. Remove the transmission support nuts and bolts.
5. Remove the transmission support from the vehicle.
Installation Procedure
1. Install the transmission support to the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the transmission support nuts and bolts.
Tighten the nuts and bolts to 70 N.m (52 lb ft).
