Safari Van 2WD V6-4.3L VIN X (2003)
Wiper Motor: Service and Repair
Wiper Motor Replacement - Lift Gate
WIPER MOTOR REPLACEMENT - LIFT GATE
REMOVAL PROCEDURE
1. Remove the liftgate garnish molding.
2. Disconnect the wiper motor electrical connector.
3. Remove the wiper arm from the wiper motor.
4. Remove the nut, the spacer, and the seal.
5. Remove the 2 bolts and the wiper motor from the liftgate.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the wiper motor to the liftgate with the 2 bolts.
Tighten
Tighten the bolts to 7.0 N.m (62 lb in).
2. Install the seal, the spacer, and the nut.
Tighten
Tighten the nut to 6.0 N.m (53 lb in).
3. Install the wiper arm and blade.
4. Connect the wiper motor electrical connector.
5. Install the liftgate garnish molding.
